Use a bucket and a power mixer fitted with a mixing paddle to mix the Thoroseal with water. Thoroseal can be mixed by hand, but using a power mixer is more effective. Mix the Thoroseal with water at a ratio of 6 to 8 quarts of water for a 50-lb. bag of Thoroseal.

Also know, how do you mix super Thoroseal?

Mixed with clean water to a slurry consistency, Super Thoroseal can be applied easily with a stiff handbrush, broom, or spray equipment. Just clean the surface of dust and other particles before application. Next, add 1.5 liters of water for every can and shake the can well. Then apply two coats on the surface.

Similarly, how long does Thoroseal take to dry? Leave the THOROSEAL to stand for 10-20 minutes to allow full saturation to take place. Re-mix, adding a small quantity of liquid if required, to restore the consistency. Do not apply THOROSEAL to frozen substrates or if the ambient temperature is below 5ºC or expected to fall below 5ºC within 24 hours.

Furthermore, how do you apply Thoroseal waterproofing?

Use a tampico fiber brush to apply Super Thoroseal® in a thick coat, working the mixture into the pores of the surface for a good penetrating seal. Double back and use the brush to smooth out the material. Allow 12 hours between coats for drying time. Lightly dampen wall before applying second coat.

Is Thoroseal safe for fish?

Thoroseal is not only renders the concrete permenately waterproof, it is non toxic to fish..

How much does Thoroseal cost?

MasterSeal 583 Formerly Super Thoroseal
List Price: $67.36
Price: $62.80 & FREE Shipping
You Save: $4.56 (7%)

What is Thoroseal used for?

Thoroseal is a building product manufactured by BASF Construction Chemicals. It is a waterproof cement-based coating that is used to fill, seal and protect interior and exterior surfaces. It is resistant against weather erosion and can be used to protect concrete, brick, building blocks and other materials.

Can Thoroseal be applied over paint?

Super Thoroseal is suitable for a variety of waterproofing applications, including above and below grade concrete and masonry waterproofing. It cannot be applied to painted surfaces.

What do you use to seal a fish pond?

Best Pond Sealer: Liquid Rubber Waterproof Sealant Liquid Rubber Waterproof Sealant (link to amazon) is the best concrete pond sealer. It is a water-based liquid rubber sealant that is safe for both fish and the environment.

Is a concrete pond safe for fish?

Concrete ponds can be “cured” and made safe for fish without any special coatings. Keep the newly constructed pond filled for a week, then drain and refill.

How do you seal concrete to hold water?

Apply a thin coat of concrete sealant with a paint brush. Use back and forth even strokes to apply an even coat. Wear a mask and rubber gloves while applying the sealant to avoid inhaling any fumes or allowing the sealant to come in contact with your skin.

How do you apply pond armor?

How To Use
  1. Prepare Surface. Follow included instructions for the surface you intend to cover with Pond Shield.
  2. Mix Product & Apply. Only mix enough product that you can use within 30 minutes.
  3. Inspect & Touch Up. After application has been completed, inspect the surface area. Touch up areas as needed.

How do you waterproof a water feature?

Waterproof your fountain before filling it with water.
  1. Drain the fountain and allow it to dry.
  2. Mix masonry waterproofing compound as directed by the manufacturer.
  3. Spray the fountain with water if it has dried while you were preparing the compound.
  4. Allow the fountain to dry.
  5. Spray the dried compound with water.

How do I waterproof my concrete pond?

A more popular method of waterproofing a concrete pond is to paint the final layer of render with G4 concrete pond sealer. G4 seals the concrete, drying to form a resin-like barrier which waterproofs the pond and stops the concrete's lime from leaching into the water once the pond has been filled.

How do you seal a cement pond?

  1. Put on the rubber gloves.
  2. Clean out the leaking crack with a wire brush to remove debris and any organic growth.
  3. Mix the cement with water in a small container using a wooden stick or paddle.
  4. Scrape the cement out of the bucket and mold it into a ball in your hand.
  5. Things You Will Need.
  6. Tip.
  7. Warning.
  8. References (6)

How do you seal a fountain?

Apply spray concrete or terra cotta sealer to the inside and outside surface of the fountain reservoir. You can do this by spraying, or you can use a paintbrush. Hold the spray applicator between 6 and 8 inches from the surface of the fountain reservoir.